Specifications

Specifications

Main technical specification of the device is given in Table.

Device features
ItemValue
Power supply
AC:
  • supply voltage

  • frequency

90…264 V (nominal values – 110, 220 or 240 V)

47…63 Hz (nominal values – 50 and 60 Hz)
DC:20…34 V (nominal value – 24 V)
Maximum power consumptionmax. 5 VA
Inputs
Number of control inputs4
Current sensors poll2 mA
Nominal supply voltage of the sensors24 V
Internal power supply
Nominal DC voltage24 V
Maximum output current50 mA
Instability of output supply voltagemax. 10 %
Pulsation level, max.100 mV
Pulse counter
Number of display digits6
Counting speedmax. 2 500 Hz
Duration of input pulsesmin. 200 μs
Range of values of the multiplierfrom 0.00001 to 99999
Frequency of input filter1…2500 Hz
Pulse ratiomin. 2
Limit of permissible basic error (according to GOST24907)±1 junior digit
Outputs
Number of outputs1
Current switched by relay contactsmax. 8 A (at 220 V AC and cos φ > 0.4)
Current of transistor optocoupler loadmax. 0.4 A (at 50 V)
Current of optotriac loadmax. 0.4 A
Housing

Dimensions:

  • wall-mounting Н

  • panel-mounting Щ1

  • panel-mounting Щ2

105 × 130 × 65 mm

96 × 96 × 65 mm

96 × 48 × 100 mm

Protection class:
  • wall-mounting Н

  • panel-mounting Щ1 and Щ2

IP44

IP54 (front panel side)
Device features
Weight, max.1 kg
Average service life8 years

Operating conditions

The device is designed for operation in following conditions:

  • closed explosion-proof rooms without aggressive vapors and gases;
  • ambient temperature from -20 to +70 °С;
  • upper limit of relative humidity is max. 95 % at 35 °C and lower temperatures without moisture condensation;
  • atmospheric pressure from 84 to 106.7 kPa.

In terms of resistance to electromagnetic influences and the level of radiated radio interference, the device corresponds to class A equipment in accordance with GOST 51522-1999 (IEC 61326-1).

In terms of resistance to mechanical influences during operation the device corresponds to group of performance N2 in GOST R 52931-2008.

According to the resistance to climatic impacts during operation, the device corresponds to the execution group V4 according to GOST R 52931-2008.

Notice
Requirements in terms of external influencing factors are mandatory as related to safety requirements.