Configurable parameters
| Parameter | Allowed values | Comments | Default | |
|---|---|---|---|---|
| Designation | Item | |||
| Setpoint | 000000 – 999999 | from 000000 to 99999 | 000000 | |
| oUt | Output mode | 1 | Switched after setpoint. The output is triggered if the number of counted pulses is greater than setpoint value or equal to it. | 1 |
| 2 | Dispenser mode. The output is triggered if the number of counted pulses is in the range from zero to the setpoint value, and the last pulse that arrived at the “Start/Stop” input of the counter was the starting one. | |||
| FDP | Multiplier decimal point position | ------ | – | ------ |
| -----.- | ||||
| ----.-- | ||||
| ---.--- | ||||
| --.---- | ||||
| -.----- | ||||
| F | Multiplier | 0,00001 – 99999 | from 0.00001 to 99999 | 1 |
| DP | Decimal point position | ------ | – | ------ |
| -----.- | ||||
| ----.-- | ||||
| ---.--- | ||||
| --.---- | ||||
| SPM | Operation type after reaching setpoint | Cnt | Continue counting without resetting | rStCnt |
| rStCnt* | Reset counter and continue counting | |||
| rStStP | Reset counter and stop counting The counter is waiting for the "Start" signal | |||
| rSt | Operation type to "Reset" signal | Cont* | Reset counter and continue counting | Cont |
| StoP | Reset counter and stop counting The first impulse that came after the reset to the “Start/Stop” input will be considered as the starting one. | |||
 Notice* These parameters are not available in the Dispenser
mode (oUt = 2). | ||||
| FREQ | Frequency of input filter | 1 – 2500 | Filtering signals at the counting input of the device (from 1 to 2500 Hz) - filter 1. This parameter in the digital signal processing
unit of the device is converted to the minimum pulse duration (tmin): | 2500 |
| Cnt.t | Minimum duration of the signal on the control inputs | 200 – 999999 | Filtering signals at the control inputs of the device (from 200 to 999999 μs) - filter 2 | 200 |
| LoCK | Button lock | oFF | Buttons unlocked | oFF |
| 1 | Reset counter button locked | |||
| 2 | Reset and change of setpoints are blocked | |||
| dEFAUL | Restore factory settings | no | Do not restore settings | no |
| YES | Restore settings | |||
| PASS | Password | 0000 – 9999 | from 0000 to 9999 | 0000 |